Thursday, October 20, 2011

DIY ~ Dr. Pepper Crate Table


Beautiful weather in Texas and I've been feeling the urge to tackle another DIYer.  This time using some old Dr. Pepper crates I had laying around.  I've used them before as low shelving in my son's room when he was younger ~ but he kind of outgrew that idea.  Still a lover of Dr. Pepper ~ they needed to be put to some sort of use.  


This project required five crates ~ I found these a number years ago at a flea market ~ 5 For $20.


First, I stacked them on top of each other.  The top two were a wee bit smaller than the bottom ones ~  but no worries ~ this project is very forgiving.  


Secondly, I racked my brain to come up with a way to connect them all together.  I perused the aisles of the local hardware store until I found ~ duct hanger strap ~ it's used for hanging ductwork in attics.  It's very inexpensive ~ plus ~ it reminded me of the original metal on the crates that was used for reinforcement.   I measured the height of the crates, when they were stacked atop each other, to determine how long to cut the hanger strapping.  I cut four strips (two for each end) with tin snips. 


Next, I held the strapping in place and marked a couple of spots on each crate with a Sharpie.  I then pre-drilled the holes to prevent the wood from splitting.  Following, I screwed the strapping into place with small wood screws (shown above).  By attaching the crates together with the strap and screws (10 per strap), the crate base is quite stable.


Creating the table top was my next step for this DIY.  I used some scrap lumber I've been saving for a project like this.

  
I measured and cut the boards so that there would be a 1" overhang on all four sides.  *Ya think it's a little weird that I love the smell of freshly cut wood?


I sanded the boards with a sanding sponge, to prevent splinters, and then ran a thin bead of wood glue between each board. 
 

I clamped the boards together and allowed them to dry overnight.  Finally, I attached the top to the base by predrilling a hole in each of the four corners and screwed the two together using wood screws.


I think the salvaged wood top compliments the weathered Dr. Pepper crates perfectly!  What do you think?  I sealed the wood, using a matte finish sealer and to complete the project ~ I screwed four rubber bumpers on the bottom of the crate at each corner to protect the flooring.
 
And here's the finished project!  I snipped a few branches from a bush in the backyard ~ luckily the foliage matches the crates to a tee.  I'm loving this crate table and think it turned out pretty spectacular!


That's all for this DIY project ~ I hope you have a wonderful weekend!  Also, thanks to my carpentry tutor ~ Frani ~ for all of  your helpful tips!

20 comments :

  1. I couldn't agree more! This turned out great. Now where did ou find those crates!
    Kim@reposhture.blogspot.com

    ReplyDelete
  2. Sorry, just realized you got them at the flea market! I was reading too fast, hazardous sometimes ;0)

    ReplyDelete
  3. this looks amazing, i love it, thanks for sharing xxx

    ReplyDelete
  4. Saw a picture of your rake wine glass holder at TipJunkie's site and had to check you out. Love your ideas and style. We have some common interests so please stop by for a visit some time.

    ReplyDelete
  5. Geez, I love this-- and I would never have thought to do this. It's just perfect. The red, the worn look and such a great size, too.

    Have a great weekend!

    ReplyDelete
  6. Thanks John from the Frugal Tree. I popped over to your site and love the way you recycle and reuse things. Wish I had some giant leaves in my yard! :)

    ReplyDelete
  7. Thanks Christina ~ it really did turn out to be the perfect size. So glad you stopped by ~ have a great weekend! :0)

    ReplyDelete
  8. Thanks Tania ~ I'm glad you like it! :)

    ReplyDelete
  9. I wonder if this could be altered a little to make the crates drawers to put magazines, remotes, toys, or as a place to hide stuff when company comes.

    ReplyDelete
  10. Brittany ~ great idea! I'll have to put some thought to it to figure it out. Let me know if you come up with a way to do it. :)

    ReplyDelete
  11. What kind of matte sealer did you use? I have a similar type of project, but I can't find a quality matte finish.

    ReplyDelete
    Replies
    1. I used Minwax water-based polycrylic. Here's the link: http://www.minwax.com/wood-products/interior-clear-protective-finishes/minwax-polycrylic-protective-finish. Good luck with your project. :)

      Delete
  12. Just found your blog and I'm sure glad I did... I'm adding you to Bloglovin so I don't miss a thing.
    I love your tag header and your projects are just what I want to see.
    I blog at Homeroad.net
    Susan

    ReplyDelete
    Replies
    1. Thanks Susan ~ I'm so happy you found me too! I appreciate your thoughtful comments. I'll head over to pay you a visit! Have a lovely day!
      :) Dana

      Delete
  13. i used these metal bands to attach wood before. are the crates stable or "wobbly"? looks great.!

    ReplyDelete
  14. Hi Susan ~ I hope you get this. I've been unable to respond in the "Reply" section of comments posted. The crate table is extremely stable. I tried to use attach two screws through the metal bands per crate if possible. So, there were quite a few screws used, thus causing it to be very sturdy. Thanks so much! Have a good day.

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...